 |
Mystical Wonders Discussion Group
This is the #1 spiritual / mystical group in the world that encompasses literally all fields at one forum with tons of archived discussions and thousands members worldwide! Existing since 2003.
|
|
|
| Author |
Message |
LEE_MAJORS
Joined: 30 Aug 2007
Posts: 13
|
 Posted: Thu Aug 30, 2007 1:11 am Post subject: Help!
|
 |
|
Hi all
I recently became interested in Radionics and the idea of manfesting so i bought this 7 dial radionics box which came with a lovely orgon pendulum on ebay. I must say from the look of it, some very good workmanship has gone into making it. Only thing is, i lost the booklet that goes with it which describes how i set about using this machine. Below is a image of my box. Hope someone can help me out as i want to start manifesting changes in my life with the power of radionics.
Thanks
Lee
[URL=http://www.picoodle.com/view.php?img=/9/8/29/leemajors888/f_radionics7dm_a058f83.jpg&srv=img26] [/URL]
|
|
| Back to top |
|
 |
|
|
Melchizedek
Joined: 03 Apr 2006
Posts: 184
|
|
Posted: Fri Aug 31, 2007 4:42 am Post subject:
|
|
|
Well, from the looks of the picture, I'd say the knobs and plate on the left hand side look like their, the trend plate/tuning knobs and the ones on the right hand side, look like their the target plate/tuning knobs. The dial in the middle on the top, looks like the power level knob.
Looking at the picture, you posted. Try putting a picture or the name of the person you want to influence on the right side. I guess that would be you. Then put a picture or the written statemenet of what you want on the left hand side.
Now, I don't see any rubbing plate, so if you don't have a pendulum, take a key, tie a piece of string to it and make one. Hold it between the thumb and first finger of whatever hand you don't normally use in writing, so that you can adjust the knobs, with your writing hand, while you dowse for answers to get a fine tune for your target and another one for your trend.
Take a piece of paper and make a circle, draw a horizanatal line through it and label it, " Not in Tune", then draw a vertical line through it and label this one, "In Tune". Now place this drwaing on a table, next to your rad box and dangle your pendulum, in the middle of the axis of your dowsing map, that you just made.
As your holding your pendulum, above this drwaing you made, beginning with the top knob, start turning the knob, slowly and notice how the pendulum swings, you want to go through all 3 knobs, adjusting them while you notice the pendulum, begin to move as you are getting a tuning.
As I said, go through each one, until you get the pendulum, swinging along the in-tune line on your drawing. Look for any movement, along this "In Tune" line that you made, it might only be a slight swing, but you'll get better with it, through practice and observation.
Then repeat the procedure, with the other side, going through all 3 knobs, until you get the pendulum moving, along the "In-Tune" linethat you drew.
When your done adjust that middle knob at the top, making sure that you have the machine turned on, unless of course it's non-powered and your done.
Good Luck
|
|
| Back to top |
|
|
|
|
Melchizedek
Joined: 03 Apr 2006
Posts: 184
|
|
Posted: Fri Aug 31, 2007 4:46 am Post subject:
|
|
|
|
I just reread your post and noticed, that you got a pendulum with it, so that means that , yes you will have to dowse for your tunings. Try following what I posted, practice with the pendulum and you'll get it down
|
|
| Back to top |
|
|
LEE_MAJORS
Joined: 30 Aug 2007
Posts: 13
|
|
Posted: Sat Sep 01, 2007 5:06 am Post subject:
|
|
|
| Melchizedek wrote: | Well, from the looks of the picture, I'd say the knobs and plate on the left hand side look like their, the trend plate/tuning knobs and the ones on the right hand side, look like their the target plate/tuning knobs. The dial in the middle on the top, looks like the power level knob.
Looking at the picture, you posted. Try putting a picture or the name of the person you want to influence on the right side. I guess that would be you. Then put a picture or the written statemenet of what you want on the left hand side.
Now, I don't see any rubbing plate, so if you don't have a pendulum, take a key, tie a piece of string to it and make one. Hold it between the thumb and first finger of whatever hand you don't normally use in writing, so that you can adjust the knobs, with your writing hand, while you dowse for answers to get a fine tune for your target and another one for your trend.
Take a piece of paper and make a circle, draw a horizanatal line through it and label it, " Not in Tune", then draw a vertical line through it and label this one, "In Tune". Now place this drwaing on a table, next to your rad box and dangle your pendulum, in the middle of the axis of your dowsing map, that you just made.
As your holding your pendulum, above this drwaing you made, beginning with the top knob, start turning the knob, slowly and notice how the pendulum swings, you want to go through all 3 knobs, adjusting them while you notice the pendulum, begin to move as you are getting a tuning.
As I said, go through each one, until you get the pendulum, swinging along the in-tune line on your drawing. Look for any movement, along this "In Tune" line that you made, it might only be a slight swing, but you'll get better with it, through practice and observation.
Then repeat the procedure, with the other side, going through all 3 knobs, until you get the pendulum moving, along the "In-Tune" linethat you drew.
When your done adjust that middle knob at the top, making sure that you have the machine turned on, unless of course it's non-powered and your done.
Good Luck |
Hey Melchizedek, great stuff! So once i have it 'In-tune' using the method you suggested do i just leave it with my picture and statement on the target and trend plate then go off and let it do its work? Also whats the best way of making a statement? I.e 'i want to increase my confidence' on the trend plate? Thanks for the guidence.
|
|
| Back to top |
|
|
|
|
Melchizedek
Joined: 03 Apr 2006
Posts: 184
|
|
Posted: Sat Sep 01, 2007 4:38 pm Post subject:
|
|
|
| LEE_MAJORS wrote: | | Melchizedek wrote: | Well, from the looks of the picture, I'd say the knobs and plate on the left hand side look like their, the trend plate/tuning knobs and the ones on the right hand side, look like their the target plate/tuning knobs. The dial in the middle on the top, looks like the power level knob.
Looking at the picture, you posted. Try putting a picture or the name of the person you want to influence on the right side. I guess that would be you. Then put a picture or the written statemenet of what you want on the left hand side.
Now, I don't see any rubbing plate, so if you don't have a pendulum, take a key, tie a piece of string to it and make one. Hold it between the thumb and first finger of whatever hand you don't normally use in writing, so that you can adjust the knobs, with your writing hand, while you dowse for answers to get a fine tune for your target and another one for your trend.
Take a piece of paper and make a circle, draw a horizanatal line through it and label it, " Not in Tune", then draw a vertical line through it and label this one, "In Tune". Now place this drwaing on a table, next to your rad box and dangle your pendulum, in the middle of the axis of your dowsing map, that you just made.
As your holding your pendulum, above this drwaing you made, beginning with the top knob, start turning the knob, slowly and notice how the pendulum swings, you want to go through all 3 knobs, adjusting them while you notice the pendulum, begin to move as you are getting a tuning.
As I said, go through each one, until you get the pendulum, swinging along the in-tune line on your drawing. Look for any movement, along this "In Tune" line that you made, it might only be a slight swing, but you'll get better with it, through practice and observation.
Then repeat the procedure, with the other side, going through all 3 knobs, until you get the pendulum moving, along the "In-Tune" linethat you drew.
When your done adjust that middle knob at the top, making sure that you have the machine turned on, unless of course it's non-powered and your done.
Good Luck |
Hey Melchizedek, great stuff! So once i have it 'In-tune' using the method you suggested do i just leave it with my picture and statement on the target and trend plate then go off and let it do its work? Also whats the best way of making a statement? I.e 'i want to increase my confidence' on the trend plate? Thanks for the guidence.
|
Yeah, just leave it on, see if you can feel the confidence. You can just write, " I am now brimming with super self-confidence, in everything that I do or say". Something like that, let the machine run, then go about your business and see how you feel in different situations. If you feel more conficent.
Basically, you just want to practice using that pendulum, with some type of map, for guidance, like I suggested, eventually you won't even need it anymore.
The first thing I would do, using the pendulum, is to decipher, which side really is for the trend and which one is for the target. Try dowsing this question, lime 5 times and see what you get for a response.
|
|
| Back to top |
|
|
yourdost
Joined: 16 Nov 2006
Posts: 64
|
|
Posted: Wed Sep 19, 2007 9:59 pm Post subject:
|
|
|
|
Lee any luck with your rad machine, did you get any good results?
|
|
| Back to top |
|
|
|
|
yourdost
Joined: 16 Nov 2006
Posts: 64
|
|
Posted: Wed Sep 19, 2007 10:03 pm Post subject:
|
|
|
Mel, when we have to stop turning dial? on slight swing or full swing of pendulum, and if the correct setting/rate is in between slight swing and full swing how can we be sure that correct rates has been obtained
thanks
|
|
| Back to top |
|
|
|
Remote Viewing Consulting
Click to consult with trained remote viewers to find out anything about any person, event, location or more. Access information like never before!
http://www.remoteviewers.eu |
Manifestation Master
Manifest your desires by having an experienced Master broadcast your intentions & affirmations to the universe. Hundreds of testimonials!
http://manifestation-master.com |
Distance Group Healing
You've heard of Distance Healing but have you ever experienced Group Distance Healing? More healers equals more results. Experience it for yourself.
http://www.distancehealing.eu |
|
|
|
|
Mystical Wonders™ is an established trademark since June, 2003.
|
FAQ
Refer A Friend
Search
Usergroups
Register
Subscription
Transactions
Log in to check your private messages
